HTH Rapidfloc 3lt
HTH Rapidfloc 3lt
£25.95
- Stock: In Stock
- Model: 3lt
- Weight: 5.00kg
- MPN: HTHCL3/4
HTH Rapidfloc
3 litre
Combats cloudy water by sending impurities to the bottom of the pool (filtration off)
Liquid, prehydrolyse, offers considerably facilitated use in comparison to powder products
Faster action in liquid format
Very low level of residual aluminium in the treated water
Effective for any pH between 6.9 and 7.8
Product offering optimum yield with alkalinity between 8 and 15 degrees farenheit (80 and 150mg/l)
Dosage: 250ml of product for 10m³ of water to be clarified
Caution - Should never be used with diatomaceous earth, cartridge or filter bags
| General | |
| Dose rate | 250 ml of product for 10 m³ of water to be clarified |
| Instructions | Compatible with salt chlorination. Use 250 ml of product per 10 m³ of water to be clarified. If possible, place the multi-way valve in the circulating (recirculate) position and turn the pump on otherwise allow the filtration to work as normal Pour, without diluting, the product in a watering can with a rose head Sprinkle the product directly into the pool onto the largest surface, in front of the inlets if there are any Allow the product to disperse for 2 hours <p>Stop the filtration pump</p> <p>Allow product to work, ideally for 24 hours, then one floc has settled on the pool floor, carefully vacuum as much as possible to waste – removing any remainder by normal filtration</p> |