Blue Horizons Leak Sealer 1lt

Based on 0 reviews. - Write a review

£27.95

Stock: In Stock
Model: 1lt

Blue Horizons

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Blue Horizons Leak Sealer

1 litre bottle

Seals minor cracks

Suitable for pool & spa pipework

Fast acting liquid for easy application

Leak Seeker is designed to seal minor cracks and resulting leaks in pool and hot tub pipework and/or pool surfaces. Leak Seeker is fast acting and usually stops leaks within 24 hours.

General
Dose rate	<table> <thead> <tr> <th scope="col">Litres</th> <th scope="col">Gallons</th> <th scope="col">Dose Rate</th> </tr> </thead> <tbody> <tr> <td>4,546</td> <td>1,000</td> <td>75ml</td> </tr> <tr> <td>11,365</td> <td>2,500</td> <td>190ml</td> </tr> <tr> <td>22,730</td> <td>5,000</td> <td>380ml</td> </tr> <tr> <td>45,460</td> <td>10,000</td> <td>760ml</td> </tr> <tr> <td>68,190</td> <td>15,000</td> <td>1.14lt</td> </tr> </tbody> </table> <p> </p>
Instructions	<p>Prior to applying Pool Leak Seeker, remove your automatic pool cleaner from the pool. </p> <p>Turn the pool pump off and set the filtration to ‘bypass’ or ‘re-circulate’ mode. If neither of these options are available, remove the filter grids or cartridge from the filter prior to commencing treatment. Isolate all dosing control/tablet feeders/salt chlorinators from the water line prior to dosing the Leak Seeker. </p> <p>For leaks in the pool surface: Add Leak Seeker directly to the pool in or around the location of the leak. Alternatively, distribute the product evenly around the pool. For leaks in the pipework: Add the required dose of Leak Seeker directly into the skimmer when the pumps are “off”. Allow product to percolate through the pipework. If unsure of leak location, follow the instructions for leaks in the pool surface. </p> <p>Wait 30 minutes and then turn the pump “on” and leave the pump running for a minimum of 8 hours. </p> <p>Mark the water level and check again in 24 hours. </p> <p>A second application may be required, especially in larger pools. </p> <p>Leave the pool until all the residue has settled (usually within 6 hours) before vacuuming any residue in the pool to waste. </p> <p>Replace the filter grid or cartridge after 24 hours and resume normal operation. </p>

Blue Horizons Leak Sealer 1lt

Write a review

Information

My Account

Customer Service